HF 13.56 MHz
Near-field communication · ISO 14443 · ISO 15693 · NFC
Anchor product
TNX-A01
HF Antenna — Standard
Our proven 25×25mm HF antenna with verified superior read range over market standard. Developed and field-validated in a 3-phase induction charger for commercial food service. Drop-in replacement for existing 25×25mm HF antenna designs with measurably better performance.
Frequency13.56 MHz
Dimensions25 × 25 mm
Cable500 mm
ConnectoruFL
SubstrateRigid PCB
| SKU | Product | Key specs | Status | |
|---|---|---|---|---|
TNX-A02 |
HF Antenna — Compact
Same superior coil geometry as TNX-A01 with 100mm cable for space-constrained board layouts and tight enclosures.
|
13.56 MHz
25×25mm
100mm cable
uFL
Rigid PCB
|
Available | → |
TNX-A03 |
HF Antenna — Flex
Flexible PCB construction for conformal mounting on curved surfaces, wearables, and thin consumer devices. Full HF 13.56 MHz NFC compatibility.
|
13.56 MHz
25×25mm
500mm cable
uFL
Flex PCB
|
Available | → |
LF 125 kHz
Access control · Animal ID · Industrial asset tracking
| SKU | Product | Key specs | Status | |
|---|---|---|---|---|
TNX-B01 |
LF Antenna — Standard
125 kHz rigid antenna with high Q-factor coil. Compatible with EM4100, HID Prox, and FDX-B transponders. Optimized for door entry, time & attendance, and industrial proximity applications.
|
125 kHz
uFL
Rigid PCB
EM4100 · HID · FDX-B
|
Coming soon | → |
TNX-B02 |
LF Antenna — Flex
Flexible 125 kHz antenna for body-worn and implant-adjacent designs. Thin substrate with biocompatible-safe materials. Compatible with EM4100 and ATA5577 transponders.
|
125 kHz
uFL
Flex PCB
EM4100 · ATA5577
|
Coming soon | → |
UHF 860–960 MHz
RAIN RFID · EPC Gen2 · Logistics · Inventory
| SKU | Product | Key specs | Status | |
|---|---|---|---|---|
TNX-C01 |
UHF Patch Antenna
860–960 MHz embedded patch antenna for RAIN RFID deployments. Optimized radiation pattern for portal, conveyor, and shelf reading. Available in SMA and uFL connector variants.
|
860–960 MHz
RAIN RFID
EPC Gen2
SMA / uFL
Rigid PCB
|
Coming soon | → |
Reader modules
Pre-matched to Tagnetix antenna families — zero-tuning integration
| SKU | Product | Key specs | Status | |
|---|---|---|---|---|
TNX-R01 |
HF Reader Module
Compact HF/NFC reader module built on ST25R3916. Supports ISO 14443 A/B, ISO 15693, NFC Forum types 1–5. Pre-matched to TNX-A01, A02, and A03 antennas. UART and SPI host interfaces.
|
ST25R3916
UART / SPI
ISO14443 · 15693
NFC
Pairs: TNX-A01/02/03
|
In development | → |
TNX-R02 |
LF Reader Module
Embedded 125 kHz reader for EM4100, HID Prox, and ATA5577 transponders. Compact footprint with UART interface. Pre-matched and characterized against TNX-B01 and TNX-B02 antennas.
|
EM4100 · ATA5577
UART
HID Prox
Pairs: TNX-B01/02
|
In development | → |
TNX-R03 |
UHF Reader Module
High-performance RAIN RFID reader built on Impinj R2000. Multi-tag inventory, dense reader mode, GPIO control. Ethernet and USB host interfaces. Pre-matched to TNX-C01 patch antenna.
|
Impinj R2000
Ethernet / USB
EPC Gen2
ISO18000-6C
Pairs: TNX-C01
|
In development | → |
Need help choosing? Every Tagnetix reader module is pre-matched to its antenna family — no RF tuning required on your end.
Talk to an engineer →